Please use this identifier to cite or link to this item: http://ir.library.ui.edu.ng/handle/123456789/9375
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAkintola, S. A.-
dc.contributor.authorOlawoyin, A. B.-
dc.date.accessioned2024-07-04T08:13:31Z-
dc.date.available2024-07-04T08:13:31Z-
dc.date.issued2021-11-
dc.identifier.issn2578-4846-
dc.identifier.otherui_art_akintola_optimization_2021-
dc.identifier.otherPetroleum & Petrochemical Engineering Journal 5(4), pp. 1-8-
dc.identifier.urihttp://ir.library.ui.edu.ng/handle/123456789/9375-
dc.description.abstractDrilling operation in the oil and gas industry takes most of the well cost and how fast the drilling bit penetrate and bore formation is termed the rate of penetration (ROP). Since most of the cost incurred during drilling is related to the drilling operations, three is need not only to drill carefully, but also to optimize the drilling process. A lot of parameters are related to the rate of penetration which are actually interdependent on each other. This makes it difficult to predict the influence of every single parameter. Drilling optimization techniques have been used recently to reduce drilling operation cost. There are different approaches to optimizing the cost of drilling oil and gas wells, some of which include static and /or real time optimization of drilling parameters. A potential area for optimization of drilling cost is through bit run in the well but this is particularly difficult due to its significance in both drilling time and bit cost. In this sense, as a particular bit gets used, it gets dull as its footage increases, resulting from the reduction in the bit penetration rate. The reduction in penetration rate increases total drill time. In order to optimize bit cost, it is desirable to find a trade-off between the two by a bit change policy. This study is aimed at minimizing drilling time by use of artificial intelligent for the bit program. Data obtained from a well in the Niger delta region of Nigeria was used in this study and the cost of optimization modelled as a Marcov decision process where the intelligent agent was to learn the optimal timings for bit change by reinforcement policy Iteration learning. This study was able to achieve its objectives as the reinforcement learning optimization process performed very well with time as the computer agent was able to figure out how to improve drilling cost over time. Better results could be obtained with a better hardware and increased training time.en_US
dc.language.isoenen_US
dc.publisherMedwin Publishersen_US
dc.subjectArtificial Intelligenceen_US
dc.subjectDrilling costen_US
dc.subjectDrilling parametersen_US
dc.subjectMarkov decisionen_US
dc.subjectRate or penetrationen_US
dc.titleOptimization of drilling cost using artificial intelligenceen_US
dc.typeArticleen_US
Appears in Collections:scholarly works

Files in This Item:
File Description SizeFormat 
(31) ui_art_akintola_optimization_2021.pdf1.17 MBAdobe PDFThumbnail
View/Open


Items in UISpace are protected by copyright, with all rights reserved, unless otherwise indicated.